## AutoCAD tutorial 20: Convert line to polyline

While we are much more focusing on AutoCAD basics here, it is necessary to learn how you can convert LINE to Polyline and vice versa.This might not make sense …

## AutoCAD tutorial 19: convert Spline to Polyline

There are diverse AutoCAD commands that will help you draw what we will call a segment if we were using the vocabulary used in Mathematics. In CAD, things have …

ANNOTATION is what make a project have all its meaning and its raison d’être to the eyes of someone looking at it when the creator of the project is not …

At an advanced stage, while operating on AutoCAD, one will no longer have as an option to avoid using commands via the command window. While you are learning how …

## Learn AutoCAD basics: DAY 21

We have hit the last DAY of the series, and we hope we have provided you with some insight and that those will help you and give you more …

## Learn AutoCAD basics: DAY 20

Nothing new under the sun. Here we come again with a bushy one.Today, you will need the ARRAY command, the FILLET command and the OFFSET command (we made an …

## Learn AutoCAD basics: DAY 19

It is time to try the HATCH command in AutoCAD.Today, we have a pretty straightforward image to replicate, and part of the task here is to use the HATCH …

## Learn AutoCAD basics: DAY 18

DAY 18, a lot must have happened by now. We wish you have been learning something valuable since the beginning of the series.Here comes one of the easiest one …

## Learn AutoCAD basics: DAY 17

There is not much hardship in the session we are about to have. This should be a piece of cake if you have been following the series since DAY …

## Learn AutoCAD basics: DAY 16

In this Learn AutoCAD basics DAY, we have learned how to grow an array on an ellipse. Today we are going to combine that skill with others to complete …

## Learn AutoCAD basics: DAY 15

In this post, we are going to be perfecting how to handle positioning in AutoCAD.The Object SNAP mode will be important for this session, The exercise itself is an …

## Learn AutoCAD basics: DAY 14

In this session there will be nothing difficult, except the fact that it will help you develop your sense of analysis while using AutoCAD.Looking at the exercise below, you …

## Learn AutoCAD basics: DAY 13

If you remember what we did in Learn AutoCAD DAY 7, you will notice that the following is quite similar to it. We had to learn how to use …

## Learn AutoCAD basics: DAY 12

All here is a déjà-vu. Last session, we’ve learned how to use the ELLIPSE command in AutoCAD, in this session we are coming back with an even easier ellipse.BUT, …

## Learn AutoCAD basics: DAY 11

Here is an exiting one! We have just noticed we needed to add more ingredient to our experiment today, for some reasons.Last DAY, we noticed the exercise we were …

## Learn AutoCAD basics: DAY 10

One of the command we have not been using since the beginning of this series is the MIRROR command. We expect to force its use with today’s session.Today’s rule …