Comments on: Learn AutoCAD Basics: DAY 12 https://tutorial45.com/learn-autocad-basics-day-122/ Tutorials and Tech Mon, 25 Mar 2024 07:12:04 +0000 hourly 1 https://wordpress.org/?v=6.9.4 By: G Fleming https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-755 Wed, 17 Oct 2018 02:08:00 +0000 http://tutorial45.com/?p=666#comment-755 Hi Andreea. Thanks for the course. Been no problem so far
I don’t seem to be able to trim an ellipse. I only seem to be able to trim the sections I want to keep along with the bits I want to loose.

]]> By: Md Irfan Mullick https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-570 Mon, 08 Jan 2018 12:53:00 +0000 http://tutorial45.com/?p=666#comment-570 In reply to Andreea.

Thank you so much, buddy. I also got stuck at the same point. Thanks for your guided images.

]]> By: Terrible_Lie_02 https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-272 Thu, 26 Jan 2017 01:31:00 +0000 http://tutorial45.com/?p=666#comment-272 I struggled on the center area with the three radius. Right click the ark and convert spline to poly line. Then use a circle with tan, tan, radius. Trim as needed.

]]> By: Andreea https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-261 Thu, 29 Dec 2016 21:15:00 +0000 http://tutorial45.com/?p=666#comment-261 In reply to Tarique Khan.

Find a way around it. You have done the most difficult part to be not able to do it.

]]> By: Tarique Khan https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-260 Thu, 29 Dec 2016 07:21:00 +0000 http://tutorial45.com/?p=666#comment-260 In reply to Andreea.

https://uploads.disquscdn.com/images/afa9e2b0327e80aa3052f8eff12b2001fa1f74c5220720076795a297fa5819c3.png i can’t fillet line and the circle at R=2

]]> By: Tarique Khan https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-259 Thu, 29 Dec 2016 07:19:00 +0000 http://tutorial45.com/?p=666#comment-259 In reply to Andreea.

i can’t fillet line and the circle at R=2

]]> By: Tarique Khan https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-258 Thu, 29 Dec 2016 07:15:00 +0000 http://tutorial45.com/?p=666#comment-258 In reply to Andreea.

https://uploads.disquscdn.com/images/2155a7924396e7606ea32a14bc49303cf73b04d907a883e7ce4a273b4a5872e0.png

]]> By: Rasudana Bagirzade https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-173 Sat, 13 Aug 2016 08:31:00 +0000 http://tutorial45.com/?p=666#comment-173 In reply to Andreea.

Yes I’ve done it. Thank you so much.

]]> By: Andreea https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-172 Fri, 12 Aug 2016 17:34:00 +0000 http://tutorial45.com/?p=666#comment-172 In reply to Rasudana Bagirzade.

You might need this: http://tutorial45.com/autocad-tutorial-10-arrays-in-autocad/

]]> By: Rasudana Bagirzade https://tutorial45.com/learn-autocad-basics-day-122/comment-page-2/#comment-171 Thu, 11 Aug 2016 09:09:00 +0000 http://tutorial45.com/?p=666#comment-171 I tried but I’m not able to do the array path. Can you please help me?

]]>