Home 3D printing pen Dikale 3D Printing Pen Review

Dikale 3D Printing Pen Review

by Tutorial45

Dikale released a new 3D printing pen with a remodeled design, an OLED display, increased safety features and an auto shut-off feature. The pen uses standard materials such as PLA and ABS and comes with a standard 1,75mm filament. It’s getting more and more popular for its cute design and kid-friendly features so below, we will go through all of them.

The kit comes packaged in a sturdy box with a handle, with two non-toxic melting PLA filament samples, 20 stencils, a clear plastic overlay and a USB power adapter. You will also get a pen stand and a manual.

What is the Dikale 3D Printing Pen?

This pen works like a small 3D printer. It has a hidden heating element that children cannot reach and an extruder that you would find on a 3D printer. Unlike 3D printers that you need to control with a computer, you just guide the pen by hand.

How does the Dikale 3D Printing Pen Work?

This pen uses plastic that comes with the kit instead of ink. You add a plastic filament and once it is in the pen, it gets hot from the heating components inside it. The heat melts the plastic and turns it into the liquid. After that, you can start writing or drawing everything you want. The best thing about the Dikale 3D Printing Pen is that it works on almost all surfaces.

Even if you’ve never had a 3D pen before, you could see the same technology in the glue gun. The filaments for the pen come in many different colors so your child will be able to bring out the artist in them.

Simple Tips For Using The Dikale 3D Printing Pen

When you draw a line, stop extruding plastic but don’t move the pen. Allow the plastic to cool for several seconds then gently pull the pen away. You will see a tiny spot of plastic sticking out of the tip of the pen. You can make these edges smooth by touching them with the side of the tip. The tip will melt the plastic and make a perfect line.

When you need to connect several lines, just pause for a couple of seconds at the point where the lines meet. The heat will remelt the line to make a strong connection.

If you need some ideas for your 3D pen, the possibilities are limited by your imagination only. Typically, two-dimensional drawings are the most popular. However, the Dikale 3D Printing Pen can add the third dimension and make your artwork realistic.

How To Use The Dikale 3D Printing Pen

Begin by plugging your Dikale 3D Printing Pen and give it several seconds to heat up. Insert the PLA plastic filaments into the pen. Using the buttons, you can regulate the speed and watch the plastic flow out of the pen.

Now, you can draw. If you need to switch colors, push the buttons and the plastic will get out of the pen. After that, you can slip a new color. The new color needs some time to melt and you need to wait a little bit like the color blends.

How To Load The Dikale 3D Printing Pen

Load the filaments from the kit into the top of the pen. Press the button to start the flow and to stop the flow, then just let it off. Pressing the button on the side of the pen will reverse the filament to let you remove it by hand.

How to maintain the Dikale 3D Printing Pen

Dikale 3D Printing Pen doesn’t require any special maintenance. If you have trouble with plastics coming out of the pen, let it cool for several minutes, take rubbing alcohol and a cloak and rub the pen. In order to avoid breaking the pen, don’t apply too much force into putting the filaments in.

Apply downward pressure whether you’re inserting the filaments. Make sure there is no plastic left inside when you add a new filament or the colors will mix together.

Artistic Uses of The Dikale 3D Printing Pen

For artistic uses, Dikale 3D Printing Pen creates thin strands of plastic. Since it stays as close to the melting pressure of the plastic as possible, it hardens very quickly, allowing you to print the strands in the air or on all surfaces. As a result, you can create almost all shapes and designs by simply moving your hand.

If it’s your first time with the Dikale 3D Printing Pen, the strand won’t form where you want it if you move the hand very fast. However, if you move your hand too slow, the pen will bunch up and plastic drops can ruin the design. Learning how to use the pen is very fun yet it requires several tries to create complex designs. The learning curve is steep for this pen and with a bit of patience, you can do everything.

Decorative Uses Of The Dikale 3D Printing Pen

Dikale 3D Printing Pen can be used for decorative purposes as well. For example, you can add a name to the side of a plastic part or add a decorative design to make it pop. If you layer the plastic on itself, you will add dimension and create texture.

The OLED display is big and simple to read. It shows the speed and temperature of the pen. You can control the speed, the temperature and the filament feed with one button. The plastic hardens quickly for a play result and higher safety.

Compared to other 3D pens, Dikale 3D Printing Pen is large but quite easy to handle and not heavy at all. With your guidance, a child can use the pen without making mistakes. It’s suitable for all ages and skill levels. Check the Price

Related Posts


Lee Eya December 11, 2017 - 9:07 am

The Dikale 3D pen works with PLA and ABS filament, not PCL . =D

Aris December 11, 2017 - 10:34 am

Thanks for your input. We’ve checked and edited it!

Leave a Comment

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy