In this challenge, we will perfect how to handle positioning and location in AutoCAD.
This session will require the Object SNAP mode. The exercise is easy, but you must be cautious while working on the project.
It will be helpful to be able to use the OFFSET command and create a circle using the features Tan, Tan, and Radius.
Learning AutoCAD Basics
The following is the exercise we will be using in this session.
Figure 1
Additional important information is indicated in the following picture.
Figure 2
Execution
The following is the key image that will help complete this project.
You need first to get the above image and then trim it. It would be best if you got the following:
You need to give the red part an OFFSET of 10 units now, and you will end up with the following.
I imagine it is all clear now. You undoubtedly know what to do next to complete this. Do not forget the two FILLET of R5 located below the two circles.
Learn AutoCAD Basics in 21 DAYS
Related posts:
AutoCAD Tutorial 00: AutoCAD Free Download Full Version
AutoCAD and its Uses: What is AutoCAD Used for?
Unique 2D Autocad Exercises to Improve Your Skill Now
Learn AutoCAD Basics: DAY 4
Learn AutoCAD Basics: DAY 13
AutoCAD Tutorial 19: Convert Spline to Polyline
Save Your Life With the SPHERE Command in AutoCAD
AutoCAD Tutorial: Breakline AutoCAD
Hey u r doing good job thanks for ur work its really help me to practice cad….will u help me how to draw 150 in above diagram …am really confused …
Draw the 20 unit segment 97 units away from the center of the circle.
Use the Points A, B and the TAN TAN RADIUS feature of the CIRCLE
command to draw the arc.
im still confused about the 150 bow,even trying to use tan,tan,radius the bow wont fit perfect into the points A & B,i tried moving the circle manually but that wasnt really acurate.
so if u could give me one more hint that would be nice
it is hard to guess what you are doing wrong. Can you upload a picture of the result you are getting?
Hello, I used TAN TAN RADIUS but here is the result.