Home AutoCAD tips AutoCAD Tutorial 03: How To Draw a Line in AutoCAD

AutoCAD Tutorial 03: How To Draw a Line in AutoCAD

by Tutorial45

We have seen a couple of ways you can go to draw a straight line in AutoCAD here. Before diving into today’s tutorial, I would like to mention something I totally forgot to mention in previous sessions.

Many people fall into this trap. You know how you are drawing a straight line in Microsoft Paint, You click and hold, move your cursor, and then when you release the click, you have a straight line? It does not work this way in AutoCAD. In AutoCAD, you actually have to release the click before moving the mouse, and you have to initiate the second click to finish drawing the straight line. Confusing?

Here is what I mean. To draw a straight line in AutoCAD:

  1. Activate the LINE command
  2. Click on the starting (Do not hold your click)
  3. move your mouse
  4. Click to indicate the ending point (Do not hold the click)
  5. Press on the ESC key on your keyboard to end the process

There are very very few actions in AutoCAD that force you to click and hold. As for now forget about CLICK AND HOLD. We will cover exceptional cases later.

That being said, let’s Start.

Drawing a Straight line with a dimension in AutoCAD

We need to talk about the ORTHO mode before anything else here.

The ORTHO mode

The ORTHO mode constrains the cursor to horizontal and vertical movement, which helps you draw straight horizontal and straight vertical lines easily.

Every time one needs to draw either a vertical or a horizontal straight line, he/she needs to make sure the ORTHO mode is activated.

The ORTHO icon is located in the Status Bar (Downright corver)


How do you know it is activated or not?

Pay attention to the information box that pops up when you hover over the icon. You can also use color indicators to know, Blue ORTHOMODE icon for ON and White ORTHOMODE icon for OFF.

Check ortho mode AutoCAD

How do you activate the ORTHO mode?

Just click on the icon to toggle it. If it is OFF, it will turn ON and vice versa

Now that we know what ORTHO is and how to use it, we can move forward.

Let’s draw a vertical line of 50 units of length.

To draw a line of 50 units:

1 – Click on the LINE icon

Icon line in AutoCAD

2 – Click once in the drawing area (Don’t hold your click)

3 – Activate the ORTHO mode if it is not activated

4 – Move the cursor away from the first point in the direction you want the line to have. Since we are drawing a vertical line, you can only go either upward or downward

5 – Type 50 on your keyboard and hit ENTER on your keyboard twice

To draw a horizontal line, just change the direction in step 4 to either left or right.

Practice exercise

Using what you have just learned, you must be able to complete the following exercise.

draw 4 lines in AutoCAD

Do not mind the annotation, once we learned how to write a text in AutoCAD, and how to annotate a drawing, you can come back and finish it up. But for now, focus only on drawing 4 lines to make a square.

Polar tracking

This feature helps track specific angles when you are drawing in AutoCAD. By default, this is set to 90, 180, 270, 360.

How to access this?

Right-click on the Polar tracking icon like shown on the image below

Polar mode in AutoCAD

What can I use this for?

You can use it to draw the following 2D image.

Draw oblique line in autoCAD

How did we get here?

Remember earlier in this article when we used ORTHO? We were only able to draw vertical and horizontal lines, now we can also track direction with specific angles. The process is the same with what we did when drawing the square above, but now we need to set the polar tracking to 45, 90, 135, 180…, draw the baseline as we did with the square, and use the polar tracking to know you are at 45 degrees before drawing the 90 unit line.

Angle of lines AutoCAD

You can set these tracking angles to be whatever you want. Using the Tracking settings, you can enter your angle of preference.

These tutorials might be useful:

Related Posts


Tutorial45 November 28, 2016 - 8:21 pm

Thanks for your input

abhi July 29, 2017 - 7:11 am

thank you so much for this…appreciate your work

Andreea November 28, 2016 - 8:28 pm

Thanks for your input

1 2

Leave a Comment